news

  • Introduction to the diagnosis of eccentric bearings

    28-09-2022

    In order to make the rolling eccentric bearing have the performance and maintain long-term use under good conditions, the eccentric bearing must be inspected and maintained. Such inspection and mainte...

  • Causes and Prevention Methods of Eccentric Bearing Corrosion

    19-09-2022

    Eccentric bearing corrosion is caused by various internal and external factors, which can be summarized as follows: 1. Metal surface finish (battery corrosion due to oxygen concentration difference). ...

  • Measuring method of residual magnetism of rolling bearing

    13-09-2022

    1. The residual magnetic measurement adopts the Hall effect principle. The measuring instrument must have a range of 1mT and an accuracy of plus or minus 3%. The size of the Hall element equipped with...

  • Introduce the principle of plane thrust bearing

    05-09-2022

    The plane thrust bearing mainly bears the axial load in the assembly, and it is widely used. Although the installation operation of the thrust bearing is relatively simple, there are still mistakes in...

  • Oil tank of bearings

    30-08-2022

    The oil groove of bearings is mainly used together with grease lubrication to replace lip seals, especially in environments where a lot of dust is encountered. This type of seal typically has several ...

  • Introduce the selection of bearing clearance

    24-08-2022

    The so-called bearing clearance refers to the amount of movement when the inner ring or outer ring of the bearing is fixed when it is not installed on the shaft or bearing housing, and then the unfixe...

Contact Us