About us

The main factors used for adjustment are installation, use and maintenance, maintenance and repair, etc. to meet technical requirements. According to the technical requirements of INA bearing installation, use, maintenance and maintenance, the clutch bearing contact load, speed, temperature, vibration, noise and lubrication state of the operated clutch are monitored and inspected. If the abnormality is found, the cause will be found immediately, and adjustments will be made to restore it to normal. The installation condition is one of the factors in the use of the bearing. It is the primary factor that often causes the state of the various parts of the installation package to change. The internal factors mainly refer to the structural design and quality in the abnormal operating state and the early termination of life. There are three factors that determine the quality of the bearing.

 

The bearing is the fixed part of the machine and the main body of the machine. Its function is basically to maintain the center position of the shaft and to control the movement of the machine. Clutch bearings play a pivotal role in any machine. Without the bearings, the machine cannot run. Many users have reported that when using bearings, INA bearing heating failure is the most common, this failure will also affect the life and performance of the bearing.

 

Bearing heating failure can generally be solved by lubrication, and each type of bearing and each type of clutch bearing are different when using lubrication, which is more conducive to the maximum service life of INA bearings, which is the performance of mechanical equipment. In the state of highest performance.

The influence of the metallurgical quality of the bearing material is the main factor in the early failure of rolling bearings. With the progress of metallurgical technology (such as bearing steel, vacuum degassing, etc.), the quality of raw materials has been improved. The proportion of raw material quality factors in the analysis of clutch bearing failures has been significantly reduced, but it is still one of the main factors of INA bearing failure. Whether the selection is appropriate is still a bearing failure analysis that must be considered.

 

Bearing manufacturing will go through multiple processes of forging, heat treatment, turning, grinding and assembly. The rationality, advancement and stability of the treatment will also affect the service life of the bearing. Affecting the heat treatment and grinding process of INA bearings is often related to product quality more directly related to the failure of the bearing. In recent years, studies on the deterioration of the surface layer of clutch bearings have shown that the grinding process is closely related to the surface quality of the bearing.

 

The main task of INA bearing life analysis is to find out the main factors causing bearing failure based on a large number of background materials, data and failure mode analysis. Therefore, improvement measures are proposed to extend the service period of clutch bearings to avoid sudden bearing disease and early failure. .

0
  • factory
  • factory
  • factory
  • factory
  • factory
  • factory

Leave a Message

  • captcha

Contact Us