When using high-speed motor bearings, corrosion will occur, and many users have become accustomed to it. However, if you can understand the cause of corrosion, it may reduce the probability of bearing corrosion. So, what is the reason?

1. In the production process of high-speed motor bearings, some enterprises do not strictly follow the correct method of production, resulting in the production of bearings with poor quality and prone to corrosion.

2. In order to obtain greater profits, some manufacturers may use impure materials for production, which will reduce the quality of high-speed motor bearings.

3. The quality of anti-rust lubricating oil and cleaning kerosene used in high-speed motor bearings cannot meet the requirements of process and technical regulations.

4. Bearing packaging materials such as anti-rust paper, nylon bags and plastic cylinders do not meet the requirements of high-speed motor bearing oil seal anti-rust packaging. Of course, this is also one of the factors that cause rust.

5. Due to the harsh use environment, the high-speed motor bearing cannot be cleaned in time during use, and cannot be properly maintained, resulting in corrosion.

The above are the main reasons for the corrosion of high-speed motor bearings. Through the understanding of the above reasons, it is hoped that users can take corresponding measures for the above reasons in future use, so as to effectively avoid the corrosion of the bearings and make better use of the bearings.

If you need products such as wheel bearing & bearing kits, clutch release bearing, water pump bearing, tension bearing & timing belt kits, ball bearing, roller bearing, needle bearing, etc., you can contact Shaoxing Hengyue Bearing Co., Ltd. at any time.